Basement Bathroom Replacement

Emoh-Home Designers Inc.

1477 Ivanhoe St.

Denver, Co. 80220

Presented to Kerstin Johnson – 08/22/2018

*See job timeline & price breakdown below

Littleton Bathroom Remodel

at

544 W. Easter Ave.

Littleton, Co. 80120

– Existing bathroom –

Approximately

8′ -3″ x 5′

Job Scope:

 – Keep the same layout in the bathroom –

 – Remove existing shower surround and damaged wallboard behind it –

– To cure & remove all possible mold by mold mitigation (see below)

 – Install a 24″ vanity & top –

 – Install a 42″ x 36″ shower with bench –

 – Install Subway tile in shower with Mosaic shower pan flooring –

 – Install Subway tile on the wall which includes the vanity and toilet –

 – Install a Mosaic tile floor in bathroom and hallway to carpet –

 – Install floor leveler as needed –

 – Install new faucets & fixtures –

 – Install new wallboard, door with hardware and trim –

 – To paint walls. ceiling and trim in the bathroom –

Bathroom Breakdown:

– To remove existing damaged bathroom beadboard –

– To remove existing damaged bathroom vanity base –

– To remove existing damaged bathroom shower, shower pan and surround –

– To remove existing shut off valves and replace to code –

– To remove and install a new toilet, valve and lines as needed –

– To remove all the damaged drywall, framing, underlayment and shower pan –

– To cure & remove all possible mold by mold mitigation –

– To keep existing window and recaulk to protect from water and steam –

DECONSTRUCTION

Demolition – Hauling

– To remove existing shower pan, drain line and faucet –

– To remove existing shower surround –

– To remove all DAMAGED/MOLD/WET existing shower wall board behind shower surround –

– To remove existing shower door –

– To remove existing vanity, sink and fixtures –

– To remove and discard existing toilet – install new toilet with wax ring and toilet bolts –

– To remove existing beadboard wall paneling in bathroom –

MOLD MITIGATION

  • To mitigate mold with a mold mitigation fogger. The Concrobium fogger is an ideal way to apply Concrobium Mold Control, a proven mold fighting solution that effectively eliminates, cleans and prevents mold and musty odors without any harmful chemicals. The fogger atomizes Concrobium Mold Control into a fine mist that quickly and evenly coats surfaces to eliminate existing mold and prevent mold growth.
  • We used Concrobium Mold Control, it is a patented solution that effectively eliminates and prevents mold and mildew without bleach or harmful chemicals. It can also be used to get rid of musty odors.
  • The product works as it dries by crushing mold spores at the roots and leaves behind an invisible antimicrobial shield that prevents future mold growth.
  • Use Concrobium Mold Control for mold and mildew clean-up and prevention, general interior maintenance, water damage restoration and during construction/renovation (paint prep and pre-treatment of building materials).
  • It works great on hard and fabric surfaces such as drywall, wood, composite wood, plastic, concrete, siding, shingles, metal, brick, stone, tile, grout, stucco, fabric (sports bags, clothing), furniture, upholstery, flooring, rubber (front load washing machine gasket) and more.
  • Eliminates, cleans and prevents mold and musty odors
  • Contains no bleach, ammonia or volatile organic compounds (VOCs)
  • Penetrates to the roots of mold and leaves an antimicrobial shield
  • EPA-registered
  • Works on drywall, concrete, wood, masonry, siding, shingles, stone, grout, plastic, tile and many more surfaces.
  • After mitigation was complete we covered the area with a protective paint surface prior to drywall.

CARPENTRY

 – To install new Hardi-backer or schluter wall board in the shower –

– To install 1/4″ Hardi-backer board to floor as needed –

– To install a new 24 ” bathroom vanity cabinet (client supplies)

Local sources for tile and cabinetry

Stone International Cabinets

Home Depot vanities

ELECTRICAL

– To install new light over sink (client supplies) 

– To install new heated ceiling fan (client supplies) 

– To install new GFCI electrical outlet –

– To install two new light switches for ceiling fan and vanity light –

Home Depot Lights

FLOOR & WALL TILES

– To install underlayment and floor leveler as needed –

– To install approximately 150′ of ceramic wall & shower tiles (client supplies) 

– To install approximately 120′ of ceramic tile flooring in bathroom and the hallway (client supplies) 

Floor & Decor Subway tiles

PAINTING

– To paint with Behr or Benjamin Moore interior bathroom paint (client supplies) 

Home Depot Behr Paint colors

Benjamin Moore Paint colors

PLUMBING

– To install approximately  42 in. x 36 in.  Center Drain Single Threshold Tileable Shower Base –

– To install new 36″ shower door (client supplies) 

– To install new shower and sink faucets (client supplies) 

– To install new drain lines and shut off valves as needed –

– To install new American Standard (client supplies)
Champion 4 Max Tall Height 2-Piece High-Efficiency 1.28 GPF Single Flush Elongated Toilet in White with Slow Close Seat –

————————————————————–

 *Total project cost breakdown:   $4500

Expected Client Costs;

(Client pays material expenses and Emoh-Home Designers Inc. will supply raw materials & all labor needed)

To install approximately 150′ of ceramic wall & shower tile – price range from $350 – 480

Floor & Decor link for 3″ x 6″ Beveled Subway tile

Bright White Ice Beveled Ceramic Wall Tile

Size: 3 x 6

SKU: 100132455

$0.29 /piece $23.20 box 

80 pcs/box

16 boxes

will cover 153 sq. ft.

$371.20 estimated total

or

a larger tile 4″ x 10″ tile

Floor & Decor link for 4″ x 10″ Beveled Subway tile

Bright White Ice Ceramic Wall Tile

Size: 4 x 10

SKU: 100112689

$0.85 /piece $32.30 box 

38 pcs/box

14 boxes

will cover 157 sq. ft.

$452.20 estimated total

 To install approximately 120′ of ceramic tile flooring in bathroom and the hallway – price range from $360 – 700

Floor & Decor link for 12″ x 12″ Uptown Antracite Hexagon Porcelain Mosaic

$6.99 /piece
$699.00 estimated total

 One shower door – approx. $150-350

 One shower and sink faucet – approx. $150-300

 One 24″ Vanity & Top (reuse existing NOT an option) – price range from $150 – 500

 To paint with Behr or Benjamin Moore interior bathroom paint – price range from $40 – 100

– Payment schedule as follows –

– $350 to be paid at the start of the project for demo prep and materials needed, i.e. Prep materials, Tile underlayment and floor leveler – PAID

– $800 to be paid after demolition and mold mitigation complete and trash hauled away – PAID

– $450 to be paid after mold mitigation complete and sealed with primer according to manufacturer’s specs. – PAID

– $650 to be paid after backer board, rough plumbing and rough electrical installation – PAID

– $2000 to be paid after floor installed and wall tiles installed and grouted – PAID

– $250 balance to be paid after completion –

————————————————————————–

——————————————————————

All checks made payable to

Emoh-Home Designers Inc.

*24 month guarantee on all work performed

Our General Liability Policy information;

 

Notes:

Paint colors and options

Home Depot Behr Paint colors

Benjamin Moore Paint colors

Local sources for tile and cabinetry

Stone International Cabinets

Home Depot vanities

Floor & Decor Subway tiles